ARB Products Competition Differential Cover for DANA 60

ARB 750001 Competition Differential Cover for DANA 50/60. When traveling off-road, encountering road hazards could cause expensive damage to the differential. ARB manufactured differential covers will reduce odds of expensive damage happening.This cover has been designed to shield the differential, ring and pinion combination from hazards. It has a cross brace structure that increases the rigidity of the entire axle. Added strength to the housing keeps the pinion and ring gears meshing properly on the teeth. High-powered neodymium magnets are attached in the drain plug. The dipstick collects the metallic wear particles while the vehicle is in use. The magnet’s location on the end of the dipstick will allow the oil to be checked for obvious signs of internal damage. The engineering of this differential cover will prolong carrier bearing life because of the added strength to the bearing alignment. The dipstick/filler cap allows the differential oil level to be adjusted to customize driveline angles.

• Computer-optimized cross brace design increases the structural rigidity of the whole axle
• Additional housing strength helps keep the ring & pinion gears meshing on the flat faces of the teeth
• greatly increasing ring & pinion life and overall maximum load strength
• High power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves
• Magnet location at the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage
• Prolonged carrier bearing life due to extra support to the bearing alignment
• Approach/departure angle optimized by angled exterior surfaces
• Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles