Fly5D 74 Pcs Car Body Paintless Repair Removal Tools Automotive Door Ding Dent Silde Hammer Glue Puller Repair Starter Set Kits for Car Hail Damage and Door Dings Repair

How to use these pointless dent repair tools: 1.clean dent surface, If the dent so small and can’t see where is it, use a dent board to check where is the dent. 2.put the glue to gun and heat, connect the power source and preheat for 5-10 minutes 3.According to the Dent size to choose the Glue Puller, more bigger dent size, more bigger the glue puller and will larger force. 4.immediately place pad in the center of the dent and hold until sticks 5.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. 6.After the glue cooling, use a dent lifter or T-bar to align and press the puller to pull up the dent. 7.If dent still exists, check with a Line board again, knock it slightly with a flattening hammer or pen 8.After finishing the dent, use the alcohol to clean the glue which on the car and the puller sets. Package list: 1pcs tool bag 1pcs dent board 1pcs gold dent lifter 1pcs bridge puller 1pcs hot glue gun 1pcs 2in1 slide hammer 1pcs air wedge 1pcs mini rede lifter 1pcs silve tap down hammer 1pcs rubber hammer 5pcs white tap down sets 5pcs yellow glue sticks 5pcs black glue sticks 5pcs white glue sticks 1pcs tap down set with 9 heads 18pcs blue puller tabs 12pcs black puller tabs 10pcs red puller tabs 1pcs Empty alcohol bottle 1pcs Small plastic shovel 1pcs dishcloth 1pcs Instructions