Fly5D Auto Dent Removal Kit with Tool Bag Dent Lifter Puller Tabs for Car Body Repair

FLY5D will offer you the most complete and best quality car dent and ding remove kit for you to solve both simple and difficult,small and large car body dent projects.

How to use these paintless dent repair tools :(Suit for dent&ding and home DIY repair) 

1.clean dent surface,If the dent so small and can’t see where is it,use a dent board to check where is the dent.

2.put the glue to gun and heat,connect the power source and preheat for 5-10 minutes

3.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force.

4.immediately place pad in the center of the dent and hold until sticks

5.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.

6.After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent.

7.If dent still exists, check with a Line board again, knock it slightly with a flattening hammer or pen

8.After finishing the dent,use the alcohol to clean the glue which on the car and the puller sets.

Packing List:

1×Upgraded Green Dent Lifter

1×hot melt glue gun

15×Upgraded yellow glue stick

1×Adjustable Silver Bridge Puller

6×metal Puller Tabs

1×Tapdown Set with 9 Heads

1×Rubber Hammer

1× Line Board

3×Line board accessories

1×silve tap down hammer

1×2in1 T-bar

1×Red Dent Puller

4×Yellow Puller Tabs

5×Blue Puller Tabs

12×Black Puller Tabs

1×White Cotton Gloves

1×Empty Alcohol Bottle

1×Small Triangle Plastic Shovel

1×Dishcloth

1×Small Red Tool Bag

1×English User Manual